|
Infant Hand Mold, Infant Casting Kit, Infant Hand Casting, Infant Hand Cast Molding Kit
Product Details:
Finish Choices: (listed in the order shown in the feet picture below) unfinished (for comaprison), clear semi-matte sealant, clear glaze, pearl or bronze. [Note: both the glaze and the matte sealant can be used as a top coat over other paints.]
> Click above photo to see enlarged view. <
This kit contains the materials to do 2 complete castings. You can therefore cast either two hands, two feet or one hand & one foot. ["Refills" (casting powders only) to create additonal statues can be added to this complete kit at a discount- see selections above.]
The materials will accommodate a foot up to about an infant shoe size 3 and/or an infant hand up to about age 9 months. [If your child's foot is longer than 4 inches, we recommend the larger child foot & hand casting kit.]
Clear Glaze Pearl Bronze Semi-Matte Mounted Glaze
    
^ Click on above images to enlarge. ^
View More Casting Examples Here
 ITEMS INCLUDED: 2 bags of molding powder, 2 bags of casting stone, 1 reusable molding container, mixing spoon, paint brush, choice of finish, sandpaper, detailing pin and complete instructions. [We also have a variety of display cases & bases to choose from.]
Making the Mold: The molding material is cool setting, nontoxic and non allergenic. A foot-shaped molding container is supplied and wiggling is not a problem as long as your child's foot or hand remains submerged in the molding material until it sets. The set time is 2-3 minutes, which includes the mixing time. See the Product FAQs page for further details on how the material captures a detailed mold. Note: Your child never comes into contact with casting stone.
General Photo Instructions
See our Bundle Packs category for either 2-packs of this kit or to find it bundled with another kit and save 20%. See our Case Packs to purchase a 12-pack case and save 40% plus get free shipping within the U.S!
Finish Choices: (Some sort of finish is recommended to keep out dirt and oil, etc.) The clear glaze is a water based triple-thick formula that goes on smoothly with no brush strokes and usually requires only 1 thin coat. It lends a bright, clear coating that gives the illusion of depth and creates a glazed ceramic look. The clear semi-matte sealant is water-based, goes on white and dries to a clear semi-matte finish. It can also be applied over other paints. The paints are nontoxic metallic acrylics that are especially designed for bisques, ceramics and plasters.
Other items you will need (not included): bowl for mixing casting stone and liquid measuring cup
Optional Items: permanent marker for monogramming, clear coat varnish finish to go over paints (recommended if the statue will be handled a lot)
 |
Also available: |
 |
|
Life Casting Kits
