| All of our kits have easy step-by-step instructions. Here are the general steps: 1 - Mix the molding powder with water. Once the material turns from pink to white, insert the foot, hand or pairs of hands into the molding material. Within about 1 minute after turning white (if using room temp water), the mold sets. 2 - Wiggle the foot or hand(s) out of the molding material. 3 - Mix the bag of casting stone with water or prepare the wax. Pour the casting mixture or wax into the mold. Let the casting stone or wax harden. 4 -Tear open the mold, remove the statue and enjoy. See the general Photo Instructions in our photo gallery. |
3D Life Casting Kits
