|
New in 2009!
Product Details:
Cast both of baby's hands, both feet, baby's bottom & more!
    
^ Click on above images to enlarge. ^
This kit contains the materials and instructions for 7 castings: 3 hand castings (with or without an integrated base), 3 foot castings and 1 cast of baby's bottom (which instead could be used to create another hand or foot casting).
Finish Choices: (listed in the order shown in the feet picture below) unfinished (for comparison), clear semi-matte sealant, clear glaze, pearl or bronze. [Note: both the glaze and the matte sealant can be used as a top coat over other paints.]
Click above photos to see enlarged view.
Examples of baby hand castings with an integrated base.
View More Casting Examples Here
Overall, the materials will accommodate a foot up to about an infant shoe size 3 (the average age for this is 9 months) and/or an infant hand up to about age 12 months. However, every child is different and if you are unsure, measure the baby's foot. (The foot casting tray is about 5 inches long and you want to have a little wiggle room.) [Party Packs are available for larger quantities castings and/or larger castings.]
 ITEMS INCLUDED: ~7 bags of molding powder in 2 sizes
~7 bags of casting stone
~7 reusable molding containers in 3 different shapes/sizes
~mixing spoons & sticks
~disposable stone transfer pippette
~2 paint brushes & choice of finish
~sanding papers & detailing pin
~BONUS: baby safe ink pad (choose color above)
~hole punch & ribbon (for baby bottom)
~complete instructions
[We also have a variety of display cases & bases to choose from.]
BONUS INK PAD INLCLUDED (shown below; choose from the list above)
  
How is a 3D casting made? Mix the molding powder with water (cool setting, nontoxic & non allergenic) and insert the foot or hand (or dip baby bottom). Hold baby's foot or hand in ther material for about 45-60 seconds. Wiggling is not a problem as long as your child's foot or hand remains submerged in the molding material until it sets. Remove foot, hand, or bottom leaving behind a negative 3D mold. That mold is then filled with casting stone. Once hardened, the molding material is peeled away to reveal the stone staue. Note: Your child never comes into contact with casting stone. General Photo Instructions
Finish Choices: (Some sort of finish is recommended to keep out dirt and oil, etc.) The clear glaze is a water based triple-thick formula that goes on smoothly with no brush strokes and usually requires only 1 thin coat. It lends a bright, clear coating that gives the illusion of depth and creates a glazed ceramic look. The clear semi-matte sealant is water-based, goes on white and dries to a clear semi-matte finish. It can also be applied over other paints. The paints are nontoxic metallic acrylics that are especially designed for bisques, ceramics and plasters.
Other items you will need (not included): bowl for mixing casting stone, liquid measuring cup and mixing spoon
Optional Items: permanent marker for monogramming, clear coat varnish finish to go over paints (recommended if the statue will be handled a lot)
 |
Customers who purchased this also purchased the following: |
 |
|
3D Life Casting Kits
![Clay Tin or Hanging Keepsake 3-Pack Bundle [Buy 2, Get 1 Free]](images/hanging_tin_bundle.jpg "Clay Tin or Hanging Keepsake 3-Pack Bundle [Buy 2, Get 1 Free]")
